Are you an end user or business customer? Specifies the print speed. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: The thickness of the underline is that selected by ESC? A built-in serial interface RS If the printer receives GS: The printing quality of the four-part energizing mode may be less than those of the non-divided or the two-part energizing mode.

Uploader: Shall
Date Added: 9 November 2010
File Size: 54.94 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 69094
Price: Free* [*Free Regsitration Required]

All print modes except emphasized mode are effective only for alphanumeric. Sign up for newsletter.

The ESC L command puts the printer into page mode, and all commands received thereafter are processed in page mode.

Get an immediate offer. ESC Epsson can also turn on or off emphasized mode. The printer performs a hardware reset after the procedure to place the image into the NV memory.

Parameters sa to sc must not contain characters, except 0 to epsom. If the printing area width or height is set to 0, the printer stops command processing and processes the following data as normal data.


Get the item you ordered or get your money back. Repeated operations and copy printing are possible using macro definitions.

Quick Links

This command is enabled only when processed at the beginning of a line in standard mode. Therefore, it is recommended to write the NV memory 10 times epzon less a day.

The printer enters offline status after any of the following: Note, however, that the last received command is effective.

Short-circuiting an output pin with a low-impedance power supply may cause heat damage due to excess current or may melt the bonding wire. All the products will delivery to you espon workdays after confirm the payment. The printer also re-reads the DIP switch settings.

M-TII Series – Epson Australia

Any setting that exceeds the printable area is ignored. RTS is newly added. This command is available for built-in characters and user-defined characters. In this mode, the printer operates with power consumption as low as possible. Underline mode not selected.

Product may break or cause injury if it falls. No additional import charges at delivery! A built-in serial interface Baa-t500u Excessive humidity and dust may cause equipment damage, fire, or shock. If an incorrect syntax is used, the corresponding parameter setting has no effect, and the data after that is processed as normal data. The line spacing can be set independently in standard mode and in page mode. The 58 mm paper-width model does not print dot number through The print control mode which is specified with 0, 48 is same as the print head energizing mode.


When an error has occurred.

M-TII Series – Epson New Zealand

CN1 1 2 3 4 5 6 7 8 9 10 11 User side connector type: Second Status Third Status Fourth Status First Status When a sequence of operations proceed, the near end is detected, the printer platen is opened, then the printer platen is closed, the following pieces of data are accumulated.

The horizontal starting buffer position does not move. After printing is completed, ba-g500u command sets the print starting position to the beginning of the line.